News

       Reviews, tutorials and latest news on embedded systems, IoT, open source hardware, single board computers, microcontrollers, processors and more
       We have just received the LaserPecker LP5 20W Fiber and Diode Laser Engraver for review, which is part of a kit that includes a swivel extension for engraving cylindrical objects such as bottles and glasses, and a protective hood for engraving or cutting workpieces with maximum safety in a fully enclosed enclosure.
       LP5 is one of the smallest 2-in-1 laser engravers in the industry that can engrave on a wide range of materials. The fiber laser is suitable for materials such as stainless steel, aluminum, brass, silver, plastic, platinum, titanium, gold, etc., while the diode laser is more suitable for wood, acrylic, leather, glass, stone, paper, and rubber. The device has a relatively high engraving speed of up to 10,000 mm / sec and can cut wood up to 15 mm thick and metal up to 1 mm thick.
       We usually do a one-part laser engraver review, but since our LaserPecker LP5 kit includes so many accessories that require more testing than usual, we decided to do a two-part review. Today, we’ll start the first part of the review with the specs, unboxing, and eventually assembling the LP5 laser engraver with its swivel extension and protective cover. In the second part of the review, we’ll cover our experiences using the software, as well as engraving and cutting on a variety of materials.
       We received two large boxes. One (the left one) contained two smaller boxes containing the LP5 laser engraver and the rotating extension rod; the other (the right one) contained the LaserPecker protective case. Let’s start with the one on the left, which is the packaging for the LP5.
       On the top of the laser unit there is a preview button, an emergency stop button (red), a pause/resume button and a status LED.
       There is a dust filter mesh on the left side of the laser engraver that can be removed to clean the filter if dust accumulates over time.
       On the right side of the device is a small, non-removable air intake filter, as well as left/right adjustment buttons, up/down buttons, and a status light on top of the motorized stand. On the back, there’s a 24V DC jack, a slot for a security key, a USB-C port for connecting to a computer, and four USB Type-A ports for connecting accessories, the motorized stand, the protective cone cap, and a USB flash drive (in that order).
       The LaserPecker LP5 comes not fully assembled (some of the photos above were taken after we assembled it). Assembly begins with attaching the base plate to the electrical standard using an H2.5 Allen key and securing them with four M4×10 screws at the bottom of the base plate.
       The laser at the bottom of the main unit is protected by a cover, the mounting threads on the right are used to attach it to the motorized bracket, and two small holes at the top of the cover are used to install the conical protective cover.
       We can fix the laser device on the motorized stand by turning the knob counterclockwise as shown in the figure below.
       After this, you can attach the conical protective cover to the laser unit by tightening the two screws at the top of the cover.
       The assembly is complete. Before use, we still need to connect some cables. The USB Type-A port cable on the protective cover should be connected to the first (left) USB Type-A port, and the second USB-A port should be connected to the USB Type-C port on the motorized stand. We also need to connect the power supply to the DC jack.
       The rotary extension expands the capabilities of the engraving machine, allowing it to process cylindrical objects of various sizes and shapes. It supports engraving diameters from 1 mm to 145 mm. The rotary head can be adjusted up to 180 ° C and is equipped with a side angle adjustment knob for precise setting of the rotation angle.
       The swivel extension is equipped with a locking button, angle adjustment handle, lever and material clamp.
       The bottom of the headstock houses an LED status indicator, a 5V/1A USB Type-C port, and two 5V/1A USB Type-A ports.
       Like the LaserPecker LP5, the swivel extension does not come fully assembled. First, we attach the swivel head to the base plate and secure it with four M3×10 screws.
       Depending on the material used (round, cylindrical) and its size, the rotary head can be equipped with a two-stage jaw, a single-stage jaw, or a three-pin assembly. Here is a photo of us after installing a two-stage jaw on the LaserPecker rotary extension.
       Now slide the tailstock into place, attach it to the other side of the base and turn the lever on the right to secure it.
       The last step is to connect the swivel extender to the LaserPecker LP5 laser engraver. First, connect the USB-A port of the swivel extender to the USB-A “Accessory” port on the LP5, then connect the remaining USB-A port of the swivel extender to the USB-C port of the motorized stand. We also need to connect the power adapter, and we are done.
       Designed specifically for the LaserPecker LP5 laser engraver, the LaserPecker Protective Enclosure provides a safe and intelligently controlled environment ideal for indoor laser engraving in retail stores, workshops and design studios.
       The package includes the case itself, two USB-A cables, a DC power cable, three Allen keys, a screwdriver, and a user manual.
       The front panel of the rugged housing contains a status LED, up and down buttons, a camera status LED, and a front door.
       The right side of the body is equipped with an emergency stop button, a “fire extinguishing gas bomb” interface and a DC jack (bottom right).
       On the back of the case we see two USB Type-A ports for connecting accessories (left) and the laser unit (right), a DC jack for the laser unit, and a rear door.
       What is the back cover for? It’s used to connect an extra USB-A port for accessories like cameras (sold separately).
       The top of the protective casing has an opening for installation and mounting of the LaserPecker LP5 laser unit.
       Let’s get started. First, remove the laser cover if it’s still there, then insert the laser unit into the slot as shown below.
       Now let’s look inside the case and unscrew the two thumb screws on the laser unit, open the case and tighten them clockwise. Then connect the two USB-A cables and the power cable as shown in the picture below and insert the security key. The next step is to connect the exhaust pipe to the vent.
       Finally, before using the LP5 laser engraver, connect the power adapter to the DC jack of the protective cover.
       That’s all for today. In the second part of the review, ee will test the LP5 laser engraver with a rotating extension and a LaserPecker protective cover, and also try out various materials.
       We’d like to thank LaserPecker for sending us the LP5 laser engraver, swivel extension rod, and guard for review. The LP5 2-in-1 fiber diode laser engraver is priced at $2,899 (with a free materials pack), the swivel extension rod is $319, and the LaserPecker LP5 guard is $599. You can also purchase the LaserPecker LP5 on Amazon for the same price with a $400 coupon, and the swivel extension rod is an extra. The guard is also available on Amazon but sold separately.
       Continued: LaserPecker LP5 Review – Part 2: 20 Watt Diode and Fiber Laser Engraver Tested with LDS Software, Swivel Extension and Protective Cover
       CNXSoft: This review is a translation (with some editing) of the original review written by Suthini Kerdkaew of CNX Software Thailand, with some help from Kuljira, who will do most of the work on the second part of the review.
       Jean-Luc founded CNX Software in 2010 on a part-time basis, before leaving his role as a software development manager in late 2011 to write daily news and reviews full-time.
       Support CNX Software! You can donate via cryptocurrency, become a patron on Patreon, or buy products on Amazon or Aliexpress. We also use affiliate links in our articles, and if you make a purchase after clicking on these links, we will receive a commission.